Mk1GLS 0 Posted October 19, 2004 Hi all, dont think I have posted this up here b4 if I have apologies. it has been in my mind for a while. I am trying to put the finishing touches to my VR6 Mk1 Scirocco & have come to the heater. On Corrado's etc the heater works different to a rocco The water always travels round the circuit & the heater control changes the air direction rather than the water flow, rather than on a rocco there is a valve controlled by the heater slider that reduces / cuts off the water flow (the plumbing is made for this) So on the VR6 I can't slow the water flow down to the scirocco matrix in the normal fashion as since the engine is designed to have this flow I assume it would be not good! So I was thinking (carefull!) I wonder if there is some car out there that has a T or Y valve fo the water. So as you move the valve it changes the wayer flow. that way I can (with the use of one way valves from a 16v) use this to bypass the matrix. Anyone know of how this has ben done before with Vr6's into Mk1 Golfs etc? Or have any ideas. All thoughts appreciated. cheers Quote Share this post Link to post Share on other sites
