Blown 0 Posted April 4, 2005 Anyone have a clue as to what these should be attached to? I think the larger one was off the distributor shroud-which no longer exists-but I have no idea about the smaller one? Quote Share this post Link to post Share on other sites
h100vw 0 Posted April 4, 2005 Blue/white is a redundant wire that feeds the oil pressure gauge if factory fitted. The green/black is for the oil temp sender. Gavin Quote Share this post Link to post Share on other sites
randal 0 Posted April 4, 2005 Gauge eh? Would this be similar for a 16v? I've got random terminals by my oil cooler and near the ISV too - these the same then? ta randal Quote Share this post Link to post Share on other sites
h100vw 0 Posted April 4, 2005 The blue white wire goes into the fusebox but without the gauges fitted stops there. You could find out which plug it comes out in but then it would be a big hassle to use it. I'd just run a fresh wire in. The 16V has that wrie too. Gavin Quote Share this post Link to post Share on other sites
