VEEDUBBED 0 Posted April 9, 2005 Hello all, I'd like to know if i have to use the black temp gauge(Digi G60) sensor in order to operate the cluster gauge or could i just use the original 9A's 16v sensor on the head?. What about the 9A's original ISV, can it be used in place of the G60's valve?. Any help is always apriciated. Cheers. Quote Share this post Link to post Share on other sites
potatonet 0 Posted April 10, 2005 is the cluster you are using from a 16V if yes then use ure own, if no use the G60's. if the part number on the ISV is 037 906 457 D then yes you can, I have been running an 037 906 457 C on my corrado for about a year now, it just doesnt have the computer controlled blow off valve in it, and I have rerouted mine, despite what these guys say, I still have a BOV tho so =-). Quote Share this post Link to post Share on other sites
potatonet 0 Posted April 10, 2005 you probably have 034 133 455 B or 048 133 455 as an ISV, these wont work sorry. also did you use a 16V block or a G60 block to do ure conversion. or did u just slap on a G-ladder to a 16V? Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted April 10, 2005 The engine's a 9A 2 liter 16 valver, I've got all the ISVs off all models to try, i was just curios. The cluster is off a Corrado VR6. Quote Share this post Link to post Share on other sites
potatonet 0 Posted April 10, 2005 .... use the G60 sender... I think Quote Share this post Link to post Share on other sites
