Lloyd 0 Posted April 15, 2005 Hello people, I am new this forum and would really appreciate some advice. Having just purchased a lovely '95 VR6 I would like to enhance its appearance further by lowering it approx 60mm. I can only find 40mm lowering springs/kits for the VR6, can you get 60mm? Will 60mm springs from another application (golf etc) fit? and perform well? Are coilovers the only answer? I am on a budget having spent all my cash on the car! Quote Share this post Link to post Share on other sites
vdubjb 0 Posted April 15, 2005 I'd stick to a 40mm max drop. The suspension geometry becomes screwed up and your oilsump is going to take a beating. Weitec, h&r, nuespeed, h&r, eibach all make 40mm springs. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted April 17, 2005 If you want to go lower then Coilovers are best, that way if 60 is too low you can go back to 55/50 etc Quote Share this post Link to post Share on other sites
Lloyd 0 Posted April 19, 2005 OK, thanks. What about putting on slightly bigger tyres to try and fill the arches a bit more? Has anyone tried this? Say, instead of 205/40/17s putting on 205/45s ? Or will this just be daft? Quote Share this post Link to post Share on other sites
Henny 0 Posted April 19, 2005 Lloyd, that'd just throw your speedo readings out and slightly mess up your gearing... ;) Quote Share this post Link to post Share on other sites
LarryDuff 0 Posted April 19, 2005 Aside from that, the car would actually get higher! Quote Share this post Link to post Share on other sites
