Jump to content
Sign in to follow this  
NG

Manifold Problem

Recommended Posts

Changed my 42mm manifold and rocker cover to a polished 50mm.

 

But when I came to start the car it would die,

 

So I have increased the idle stabliser, just so it would not die,

 

The exhaust sounds like a Nova when stood still,

 

The Car was spot on before changing the manifold and rocker cover.

 

Help

 

Any idea's ??

Share this post


Link to post
Share on other sites

g-man,

 

No, i didnt,

 

How important is it to changing the gaskets ?

Share this post


Link to post
Share on other sites
g-man,

 

No, i didnt,

 

How important is it to changing the gaskets ?

 

well..... i think you might of answer'd you own question as you proberly have a vacuum leak causing your eratic idle probs

Share this post


Link to post
Share on other sites

Check that the down pipe beneath the air box is connected. I had the same problems a while ago my car wouldn’t start or run well after putting on a new manifold and I found the down pipe from the air box was not aligned/connected properly.

 

Check your sensors also on the right side of the head you may have disconnected one of them when replacing the rocker cover which can cause this type of problem also.

 

What yr is your 16V? I know late spec 16V corrado’s have a different bottom end to the 16V gti (besides mm size) might be worth comparing both bottom ends if you have them off again.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...