rjs356 0 Posted April 29, 2005 Having gone through the history of posts on fans and cooling have narrowed down the fault on my '95 VR6. My low speed rad cooling fan is not working when I bridge the contacts on the thermoswitch. The high speed works fine (so there is power at the thermoswitch) and the fan works. What do I check or change next? I am assuming the fan relay/control should be the next? Where will I find these. Under bonnet or with the other fuses etc.? The car has Aircon (diavia system) so there are all sorts of extra wires, pipes and relays. Thanks Quote Share this post Link to post Share on other sites
Supercharged 2 Posted April 30, 2005 I'd say it was the thermoswitch, it has two stages and one of them is not working. Quote Share this post Link to post Share on other sites
