gordy 0 Posted May 10, 2005 does anybody have the corrado vr6 vag wire diagrams that they can send me (mailto:[email protected]) Quote Share this post Link to post Share on other sites
Storm 0 Posted May 10, 2005 Gordy what specific info do you need? Quote Share this post Link to post Share on other sites
gordy 0 Posted May 10, 2005 i need to know what wires go in to the fuse board to get the ignion to come on when you turn the key all so the fuel pump isnt coming on with the key Quote Share this post Link to post Share on other sites
carpy25 0 Posted May 10, 2005 all wiring diagrams on this site http://volkswagen.msk.ru/ down to electrical equipment on the left then 3/4s way down new page lots of other good stuff to Rob :D Quote Share this post Link to post Share on other sites
h100vw 0 Posted May 10, 2005 i need to know what wires go in to the fuse board to get the ignion to come on when you turn the key all so the fuel pump isnt coming on with the key Is there an immobiliser fitted thats not disarming?? Also the fuel pump only runs for a few seconds when turning on the ign. After that it runs ONLY when the engine is running. Except if the fuel is recirculating to prevent vapour lock.. There is a red/yellow wire that runs down the drivers side sill that feeds the fuel pump. It comes out the back of the fusebox then up and down the back of the wheel arch. Gavin Quote Share this post Link to post Share on other sites
gordy 0 Posted May 10, 2005 the trouble is i have fitted a vr6 into my mk2 and have put in a full corrado loom and clocks... as my car had an ealry fuse board so it was easyer to rip all the wires out and put in the vr6 corrado full loom phat vr6 has helped me out loads.. hes done most of it..nealy all of it but were stuck now Quote Share this post Link to post Share on other sites
Storm 0 Posted May 10, 2005 all wiring diagrams on this site http://volkswagen.msk.ru/ down to electrical equipment on the left then 3/4s way down new page lots of other good stuff to Rob :D That is incredible, I just downloaded the entire Wiring diagram for a 1994 C Quote Share this post Link to post Share on other sites
PhatVR6 0 Posted May 10, 2005 I already got those diagrams, they are OK, but it isn't precise and it tells me f*ck all about the rev counter. specifically after the proper VAG ones or bentley manual ones if poss? Quote Share this post Link to post Share on other sites
gordy 0 Posted May 13, 2005 can anyone help at all please Quote Share this post Link to post Share on other sites
Storm 0 Posted May 14, 2005 I have the instruement cluster files. The files are 400k in size ping me a mail address and I will send on to you. Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted May 14, 2005 Storm, email in his original post mate Quote Share this post Link to post Share on other sites