BeavisJem 0 Posted May 15, 2005 Changed a CV joint because i had a strange knocking noise on the front of my car, just realised after 3 hours work putting the cv joint on that the wieght on the drive shaft has come loose, do i cut it off or try to stick it back on. And if i can cut it off can you give me any advice Is it rubber or metal Whats the best way to remove it Cheers Beavisjem Quote Share this post Link to post Share on other sites
BeavisJem 0 Posted May 15, 2005 oops should have put this in drivetrain sorry :oops: Quote Share this post Link to post Share on other sites
Joe M 0 Posted May 15, 2005 Angle grinder, cut it off. If it was loose before you started messing about with the cv joint then theres a good chance it was the reason for the knocking. Quote Share this post Link to post Share on other sites
Blue_Joe 0 Posted May 15, 2005 Cut it off I did with mine when it came loose. Doesn't make a blind bit of difference Quote Share this post Link to post Share on other sites
BeavisJem 0 Posted May 15, 2005 cool cheers guys Quote Share this post Link to post Share on other sites
