intake temp gauge?

[Shaggy 0]

Does anyone know where i can get a gauge that can measure my intake temps on my corrado G60? or is there a function on the mfa i can use?

 

Regards

 

Mike

[W3RKD 0]

you can get on from maplins for around £12 they fit nicley just before the throttle body.

[Rossco 0]

Any links daz, i just had a looky and couldnt find it, any tips on how to fit one??

[Supercharged 2]

Or, what about relocating the outsidfe air temp sender?

[flusted 0]

I was guna put a switch on the sensor and have 2 sensors,1 outside then 1 inside the inlet tract

[Shaggy 0]

just looked on maplin site cant seem to find anything suitable? unless it is not listed on the site???

[W3RKD 0]

ill give you the part # tomorrow of the ones we use

[W3RKD 0]

this one would do the trick nicley..

 

[web]http://www.thermometersdirect.co.uk/item368.htm[/web]

[Rossco 0]

is this one any good man??

 

http://www.maplin.co.uk/Module.aspx?Mod ... &doy=26m7D

[Shaggy 0]

where abouts and how would you mount the temp gauge just before the throttlebody darren?

[h100vw 0]

You could stick the sensor in the inlet. The wires will probably squish down a fair bit but you might need a bit of sealer(not silicone) to make it air tight.

 

Of course you need to mount the display in the car first and run the sensor through the bulkhead.

 

Gavin