Rick 0 Posted October 26, 2005 Had a new cable fitted by VW not all that long ago, but have now noticed that when the wipers are on I can feel them through the pedal. I had a look and the cable seems to touch the wiper arm (see below). Is there any way of tying it down so that it won't touch? Thanks Quote Share this post Link to post Share on other sites
RACK 0 Posted October 26, 2005 Check that the grommits are seated properly Quote Share this post Link to post Share on other sites
Rick 0 Posted October 26, 2005 Thanks but it seems as though the metal bit before the grommet needs to be higher up the cable. Buggered if I can move it though! Quote Share this post Link to post Share on other sites
RACK 0 Posted October 26, 2005 I can't remember if that bit moves or not. If not, then pull it through until the rubber bit is seated properly, then adjust the slack at the throttle body. Hope this sounds right, someone please correct me if I'm wrong Quote Share this post Link to post Share on other sites
Supercharged 2 Posted October 26, 2005 Looks a good install by VW there to me! :lol: Quote Share this post Link to post Share on other sites
Rick 0 Posted October 26, 2005 Looks a good install by VW there to me! :lol: You can't beat them :roll: After getting soaked and losing a star bolt i think it must go around the support bracket or whatever it is. Does anyone have a picture of this bit of the engine? Quote Share this post Link to post Share on other sites
