g60bv 0 Posted November 13, 2005 when my water injection kicks in it keeps blowing the in line fuse. its a aquamist system, about 2 years old 4k use. always use the correct methonol. any one else had problems.? Quote Share this post Link to post Share on other sites
Supercharged 2 Posted November 13, 2005 Pump on its way out? Quote Share this post Link to post Share on other sites
g60bv 0 Posted November 13, 2005 i did think that. but its not had a lot of use. bloody car. Quote Share this post Link to post Share on other sites
bix 0 Posted November 13, 2005 Put a bigger fuse in :) Quote Share this post Link to post Share on other sites
g60bv 0 Posted November 13, 2005 yeah did that. it was blowing 7.5 's so i put in a 10. and i only had a 20 left. that seems to be working. but at what expense. it could be putting more pressure on the pump if it is damaged,.? Quote Share this post Link to post Share on other sites
keithmac 0 Posted November 13, 2005 They list 20amp peak current draw anyway, mine runs a 20a fues. Maybe the colder temps are putting a little more strain on the pump? Quote Share this post Link to post Share on other sites
Supercharged 2 Posted November 13, 2005 I think the early pumps are prone to failing - give aquamist a call and see what they say... Quote Share this post Link to post Share on other sites
keithmac 0 Posted November 14, 2005 It sould be a race pump, the failure prone jobbies all had red anodised heastsinks iirc, very easy to strip the pump, there`s a writeup on the aquamist forum. Quote Share this post Link to post Share on other sites
