MarkGolf 0 Posted April 20, 2006 How did you do it without that mushroom tool... And how to check if they are seats coorectly? Quote Share this post Link to post Share on other sites
h100vw 0 Posted April 21, 2006 Are you talking about fitting the stem seals to the top of the guides? I have a pair of pliers for removing them, that will also put them back. Failing that, find a socket that they sit nicely in and use that with an extension, to push them down. Gavin Quote Share this post Link to post Share on other sites
steveo29 0 Posted April 21, 2006 i use a deep socket(about 10mm i think ) to push em on Quote Share this post Link to post Share on other sites
quicky1980 0 Posted April 21, 2006 i used a deep socket too when rebuilding my cylinder head. If you have a gasket kit dont forget to put the cover on the end of the valve when placing them back into the head. it helps protect the seals. Quote Share this post Link to post Share on other sites
destructiv dave 0 Posted April 21, 2006 Think he's talkng about lapping in the valves. Quote Share this post Link to post Share on other sites
MarkGolf 0 Posted April 21, 2006 Valve steam seals ;) Nice one guys, a socket it is.. Spare head for your VR anyone ;) Quote Share this post Link to post Share on other sites
