JSB Racing Shiftlight kit - Pre-order for next batch

[Dr_Redz 0]

Got mine yesterday, nice one Stu, looks like a quality piece of kit and the instructions look really clear too.

 

No probs matey, cheer!

 

Well, only one left now, before a month wait for the next batch!

 

I'll take the last one if its stil going if not 1st of the new batch please..

 

Cheers

 

Andy

[mrbeige 0]

Got mine yesterday, nice one Stu, looks like a quality piece of kit and the instructions look really clear too.

 

No probs matey, cheer!

 

Well, only one left now, before a month wait for the next batch!

 

I'll take the last one if its stil going if not 1st of the new batch please..

 

Cheers

 

Andy

 

No problem Andy. May be a couple of days wait, as we've run out of crimps for the loom, so need to order them next week.

 

DIY or do you want me to fit it to your clocks? £50 or £65 respectively delivered. (you would need to send me your cluster if you want me to do it)

[Dr_Redz 0]

excellent ..

I'll send you my clocks less if you dont mind, Just a quick one I'm running a emrald ecu can the rpm output be read from this instead .. it has a shift light line out already.

 

Andy

[mrbeige 0]

excellent ..

I'll send you my clocks less if you dont mind, Just a quick one I'm running a emrald ecu can the rpm output be read from this instead .. it has a shift light line out already.

 

Andy

 

You'll need to use the tacho output from the Emerald as the shift light needs the rpm pulse to work, but it should work fine with that. Do you clocks currently work with the Emerald?

[Dr_Redz 0]

excellent ..

I'll send you my clocks less if you dont mind, Just a quick one I'm running a emrald ecu can the rpm output be read from this instead .. it has a shift light line out already.

 

Andy

 

You'll need to use the tacho output from the Emerald as the shift light needs the rpm pulse to work, but it should work fine with that. Do you clocks currently work with the Emerald?

[mrbeige 0]

excellent ..

I'll send you my clocks less if you dont mind, Just a quick one I'm running a emrald ecu can the rpm output be read from this instead .. it has a shift light line out already.

 

Andy

 

You'll need to use the tacho output from the Emerald as the shift light needs the rpm pulse to work, but it should work fine with that. Do you clocks currently work with the Emerald?

[/quote:40eae]

 

Sorry dude, not been on here much in the last month, you still interested then? Send me a PM dude.

[potatonet 0]

work with old school clusters like my 90 Corrado? analog speedo... how much for shipping to US

[junkie 0]

You have any of these left Beigey?

[mrbeige 0]

You have any of these left Beigey?

 

I don't matey, but I'm looking into doing another batch!!!!

[junkie 0]

Its ok just bought then 1 off TheHub thats 1 of yours :D might need your help when it arrives, will be in touch.

[The Hub 0]

Never know by the time the next batch is ready, i might have got my arse in gear and will buy another set of you :lol:

[mrbeige 0]

Never know by the time the next batch is ready, i might have got my arse in gear and will buy another set of you :lol:

PMSL

[junkie 0]

Yes and no! When fitting the 3rd and 4th LED, you need to drill out he blanks, so you might notice the difference. The first and second LED's just go in blanks that are replaceable. If you take the clocks apart, you will see what I'm talking about.

 

Right then my clocks look like they already have this kit installed, ie: there is an LED already there for nothing presumably in the holes 1 2 3 4, but obviously i assume it never came as a factory fitted extra lol.

 

Are all the clocks like this or should mine light up for something as i dont wanna remove something i may need, still again assume i wont as in 5 years i have never seen them do anything, same as LED 1 2.

[mrbeige 0]

Yes and no! When fitting the 3rd and 4th LED, you need to drill out he blanks, so you might notice the difference. The first and second LED's just go in blanks that are replaceable. If you take the clocks apart, you will see what I'm talking about.

 

Right then my clocks look like they already have this kit installed, ie: there is an LED already there for nothing presumably in the holes 1 2 3 4, but obviously i assume it never came as a factory fitted extra lol.

 

Are all the clocks like this or should mine light up for something as i dont wanna remove something i may need, still again assume i wont as in 5 years i have never seen them do anything, same as LED 1 2.

Junkie, there shouldn't be any LED's in the four left most positions. I've never known any of them to have LED's already in them. Can you get a piccie up of what your clocks look like??

 

Also guys 'n' gals, if I get enough interest, I'll be doing another batch of these. Can you all stick you interest up in this thread, cheers :hitler: :dorky: :nuts:

[junkie 0]

Here is a couple of pics of my clocks, clocks untouched, no shift light kit installed.

March 91 G60.

 

I only asked as yours was a 16v that you made the kit on.

 

2.8l 24v Climatronic system.pdfPC090002.jpg[/attachment:7eotqxhj]

PC090001.jpg[/attachment:7eotqxhj]

[mrbeige 0]

Well, you have four LED blanks there. No problemo! Do you have the fitting instructions?

[junkie 0]

I do have them and they are really good instructions although i feel they could have done with a few more pictures as they seemed to miss a few steps.

 

So do i need to drill out 4 blanks then as you say just 2 previously, when you said blanks i thought you meant when you look at the clocks complete, some blanks are just that, blank and you need to drill the bit you see.

[mrbeige 0]

I do have them and they are really good instructions although i feel they could have done with a few more pictures as they seemed to miss a few steps.

 

So do i need to drill out 4 blanks then as you say just 2 previously, when you said blanks i thought you meant when you look at the clocks complete, some blanks are just that, blank and you need to drill the bit you see.

 

I may well re-do the instructions then and add some more piccies.

 

Yeah the two left hand LEDs have little plastic inserts that just pop out, but the right hand two are, as you say, blanks that need to be drilled out. :)

[junkie 0]

Ok well cheers for the help, guess i will just have to take them apart and im sure it will all become clear.

 

To anybody else the instructions are very good, a few pages long of pics and written info, its prob just me thats been thick.

[mrbeige 0]

Ok well cheers for the help, guess i will just have to take them apart and im sure it will all become clear.

As soon as you see the back of the plastic facia, you will go "aaaaaah riiiiiight" :lol:

[junkie 0]

:D im sure i will, along with some :clap: followed by :notworthy:

[mrbeige 0]

:D im sure i will, along with some :clap: followed by :notworthy:

PMSL :lol: :lol:

[The Hub 0]

I'll have another set of these if there ready in a few months :lol: nearly sorted with my brakes now and deffo want one of these kits in my raddo at some stage..... if i ever get round to installing them before something else needs fixing on the raddo :nuts:

[mrbeige 0]

I'll have another set of these if there ready in a few months :lol: nearly sorted with my brakes now and deffo want one of these kits in my raddo at some stage..... if i ever get round to installing them before something else needs fixing on the raddo :nuts:

I'll add you to the list on the first page then. :D :cheers:

[junkie 0]

I'll have another set of these if there ready in a few months :lol: nearly sorted with my brakes now and deffo want one of these kits in my raddo at some stage..... if i ever get round to installing them before something else needs fixing on the raddo :nuts:

 

PMSL