simonallis 0 Posted July 17, 2006 Guy's Can anyone help me, I've fitted many a boss kit to other cars but never had this much trouble. Ordered two models of boss, both too small to fit over the spline. My question is do I have to take another bolt off the spline, it does look like another one is on the spline which makes it to big for the boss kit? Or does anyone know where I can get the correct boss for a 1990 1.8 16v Rado. Cheers Simon. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted July 17, 2006 Welcome to the forum! Is it a Momo one?? It should be part number 8014 for '90 onwards... If you have the early one (8010) it can be fitted if the splined adapter is removed with a puller but easier to buy the correct one... The sizes are 45mm late and 26mm early I think Quote Share this post Link to post Share on other sites
simonallis 0 Posted July 17, 2006 Yep it was a momo 8014 boss kit but still didn't fit on my 1990 rado, I've sent it back for an ealier boss (8010). Where could I get a puller from, any on ebay? Thanks for you're help, this forum comes in handy. Off to the bug jam this weekend maybe I'll pick some gear from the auto jumble! Simon. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted July 17, 2006 Hmmm - somethings not right here then - the 8014 does not fit over it? The 8014 is the bigger size - does it actually have that stamped on it - spline should be 45mm, how big is the one on the car? 3 Legged pullers can be got from any tool places really... Quote Share this post Link to post Share on other sites
simonallis 0 Posted July 17, 2006 Yep, it was the 8014 boss box but could of been in the wrong box? I'm going to take off the stearing wheel again to measure it to be sure. Thanks for you're again. For a simple job, what a pain in the * Simon. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted July 17, 2006 Should have the 8014 stamped on it... No worries... Quote Share this post Link to post Share on other sites
