Wiring Toad ai606

[flusted 0]

I just had a bash at fitting a toad ai606.

Ive got it all working except the door locking and total closure.

Ive used the search and found that theres 1 wire that i can use on the corrados loom that will lock the doors and shut the windows all at once.

What colour is this wire,and where can i find it?

Other problem i have is the output wire for the total closure pulls low to ground(less than 3v).

Ive read i need to add a relay but how do i go about this as relays normally switch positive?

 

Any help much appreciated as my car is sat outside unlocked as car is delocked :oops:

[ben16v 0]

i take it you`ve googled?? (ignore me if you have!!)

 

HTH

 

ben

[quicky1980 0]

I fitted my toad ai606 alarm and managed to get everything working. Although didnt attemp auto closure.

I found the instructions to fit online, if you havent got it how the hell did you know what you where doin in the first place?

[flusted 0]

Ive got that pdf document! i dont understand the "pulls low to ground" i need 12v to lock and unlock?

It says about installing a relay,someone must of done this?

[quicky1980 0]

you on about c/l?

if i remember correctly i used the possitive trigger locking diagram for wiring up the c/l

 

im sure that the auto close wire (poss white if i remember correctly) is possitive when engaged

add me to msn if you want and i may be able to work it out with you

[flusted 0]

Il add you to msn when i get home

 

Many thanks

[Taggart 0]

you on about c/l?

if i remember correctly i used the possitive trigger locking diagram for wiring up the c/l

 

im sure that the auto close wire (poss white if i remember correctly) is possitive when engaged

add me to msn if you want and i may be able to work it out with you

 

Can anyone confirm that the corrado is the Positive Trigger Mech?

[flusted 0]

Ive finally sussed it, you need psitve to red/yellow wire by door.

You need to wire a relay so it switches polority, i have diagrams if you get stuck

[Taggart 0]

Ah, kewl, thanks, will get sorted.

 

PMd RE other prob I'm having with install

[9olo 0]

Ive finally sussed it, you need psitve to red/yellow wire by door.

You need to wire a relay so it switches polority, i have diagrams if you get stuck

 

is that wire just for the C/L or C/L and total closure??

 

 

 

as i still haven't done my C/L trip.