leigha 0 Posted November 8, 2006 before i start, on a weekend, when everywhere is closed, does anyone have any ponters for changine the rear wheel bearings? i have a pair of full kits from gsf and a garage full of tools but have never played with the rear of the corrado! Quote Share this post Link to post Share on other sites
Supercharged 2 Posted November 8, 2006 First of all take the GSF kits back and buy decent ones from a SFK dealer or VW... Are you doing the brake discs too? (It's normally advisable as they wear at roughly the same rate as bearings - life expectancy is 80-120k miles) Has your car got ABS? Quote Share this post Link to post Share on other sites
leigha 0 Posted November 8, 2006 are the GSF ones bad then? i thought about changing the rear disks but to be honest, they only have a very very small amount of wear and are in tip top condition with none of the usual corrosion from the edges etc so i'll leave them, unless the bearings are a real pig to get out! the car doesn't have ABS, which is a pity as it's not just a pure performance machine and does 95% of its milage with the kids on board. Quote Share this post Link to post Share on other sites
