Crooky 0 Posted March 7, 2007 Would like to know what the maximum horsepower output is on the corrado G60 with stage 4 on the charger and the stock 8v lump??? So including... Manifold Exhaust Head work Induction FMIC........etc etc Basically i would like to know what figures i can predict for the G60 with all mods done except 16v conversion and an uprated charger. Any feedback much appreciated 8) Alex Quote Share this post Link to post Share on other sites
flusted 0 Posted March 7, 2007 mikeg60 is pushin 251bhp Quote Share this post Link to post Share on other sites
Crooky 0 Posted March 7, 2007 Awesome!! Do you know his setup roughly??? I gather that figure is at the fly??? Alex Quote Share this post Link to post Share on other sites
flusted 0 Posted March 8, 2007 his spec is in his signiture, standard bottom end,big valve head,manifold etc Quote Share this post Link to post Share on other sites
Henny 0 Posted March 9, 2007 Mike's also running a 65mm pulley with one of G-Werks' CNC big valve heads... his spec is almost identical to mine, except for his standard bottom end, additional aquamist and 65mm pulley... superb power from a standard bottom end... 8) Quote Share this post Link to post Share on other sites
flusted 0 Posted March 9, 2007 i didnt realise he was running a cnc head? Quote Share this post Link to post Share on other sites
Shaggy 0 Posted March 9, 2007 Nope its not running a CNC Cyl Head Ian :) ( i wish it was tho lol ) , its running a P&P big valve head. Spec copied from my gallery :- 1.8 PG Big Valve Cylinder Head PSD / G-werks Full Blend G60 Schrick 268/276 Cam 65mm toothed Pulley Red Tops FMIC H2o / Meth Injection Boost Return G-werks Remap G-werks S/S Manifold Vr6 1st / 2nd G-werks Exhaust System Quote Share this post Link to post Share on other sites
Crooky 0 Posted March 9, 2007 Cheers for that buddy! :) Alex Quote Share this post Link to post Share on other sites
