timg60 0 Posted April 24, 2007 As above guys. How do I get the B piller trim off. ( the one with the seatbelt adjustment on it) in one peice....... Cant see how to get it off without breaking something. Cheers Tim Quote Share this post Link to post Share on other sites
DanVW 0 Posted April 24, 2007 Pull the coat hook off and undo the screw underneath then pull off the plastic that covers the seatbelt adjuster (I think!) there is another screw halfway down under a plastic screw cover too! Its fairly obvious once you get that lot off and not that hard because I managed last summer when the sunroof came out :-) Cheers Dan Quote Share this post Link to post Share on other sites
timg60 0 Posted April 24, 2007 Have done that and cant get the trim away from the seat belt adjuster. It looks like i could rip it off but then it must be a nightmare to put back together. Any ideas??? Quote Share this post Link to post Share on other sites
DanVW 0 Posted April 24, 2007 Sorry mate I am desperatly trying to remember how it came off :oops: I have a sneaking feeling that there might have been another screw under the rear side panel, as when I took mine off it came out fairly easly will have a closer look tonight to see if it comes back to me :-) Quote Share this post Link to post Share on other sites
timg60 0 Posted April 24, 2007 There seems to be to allen keys holding the mech on for the seat belt adjusters. would I have to undo these? Tim Quote Share this post Link to post Share on other sites
will 2 0 Posted April 24, 2007 there is a screw behind the panel but you will need to carefully bend it down a bit to see it, but dont force it or it mite break, then you can just get a screw driver in to undo Quote Share this post Link to post Share on other sites
DanVW 0 Posted April 24, 2007 Ok as you can see from the pic you just need to remove the coat hook and screw then the hidden screw halfway down the trim, then pull off the plastic cover on the seatbelt (number 3) and unbolt the top seatbelt anchor :-) Hope it helps Dan Quote Share this post Link to post Share on other sites
timg60 0 Posted April 24, 2007 Ok that helps loads. I thought I might be able to pull off the knob put after a few pulls thought I might break it. Now I know it come off will give it a bit more force..... thank you very much. Will be able to comple the grey to black transformation now..... :D Quote Share this post Link to post Share on other sites
timg60 0 Posted April 24, 2007 WOuld be good if things like that diagram got put on the KB..... Or maybe I was just being really thick / overcautious Quote Share this post Link to post Share on other sites
DanVW 0 Posted April 24, 2007 Just get a pdf copy of the bently manual off egay mine only cost a fiver and its saved me ££££££ :-) Quote Share this post Link to post Share on other sites
will 2 0 Posted April 24, 2007 just checked on mine now seeing as i have got my interior out and there is a screw just behind the rear panel, which it dont show you in the diagram above Quote Share this post Link to post Share on other sites
timg60 0 Posted April 24, 2007 Got one once but never managed to get it to install.................. Might try again. Quote Share this post Link to post Share on other sites
DanVW 0 Posted April 24, 2007 its not an install or at least my copy isnt just go to http://www.acrobat-ib.com/index.asp?PID ... EAodvS_XWg And download the reader :-) Quote Share this post Link to post Share on other sites
timg60 0 Posted April 24, 2007 Will give it a go. Cheers Tim Quote Share this post Link to post Share on other sites
