Jump to content
Sign in to follow this  
Jay2

Reversing Lights Stopped Working?

Recommended Posts

Hello,

 

Suddenly noticed that my reversing lights have stopped working on the C, checked the bulbs & got power to the cluster & everything works ok.

 

So next suspicion is that the connector to the gearstick has come off or is lose.

 

Is the connection to the gearstick underneath the car? Tried the Bentley's, but it isn't clear where the connection is.

 

Any help appreciated. :?

Share this post


Link to post
Share on other sites

The switch for the reverse lights is ontop of the shifter gables on the gearbox (on valvers, anyway). Small black box, about the size of a golfball with a two pin plug attached to it.

 

There are two bolts to remove it, and the internals are very basic when you see them, so should be easy enough to check what is going wrong! Or just get someone else with a multimeter to check there is resistance across the two pins in the plug as you put it into reverse.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...