Tim_R 0 Posted July 30, 2007 Is there anyone in the Bristol area who has vag-com and a 2x2 connector that would be able to help me out diagnosing faults on my 9a engine management? I've managed to get blink codes out of the ECU but I can't tell if the errors I'm getting are old or current. The problems I'm having at the moment is that the car is running very very lean, I've had to modify the fueling slightly so its running richer but its not set correctly. I've also been having problems with the idle stability unless the afm potentiometer is unplugged, with everything connected the car revs itself from about 800 to 1000 rpm and back. Any help would be much appreciated. Quote Share this post Link to post Share on other sites
