Jump to content
Sign in to follow this  
turborat

1.8 16v smoking???

Recommended Posts

My friend has a 1.816v and it seems to give out smoke most of the time. Not lots but enough to notice. It does it whether it is hot or cold.

It doesn't seem to use much water and runs fine.

 

Does anyone have any ideas what the problem could be??

 

Thanks

Share this post


Link to post
Share on other sites

if it smokes all the time it would prb be an oil seal somewhere.

 

if it smokes just on startup, it is more likely to be valve stem seals.

 

if it just does it under accelerating...umm....help anyone?

Share this post


Link to post
Share on other sites
My friend has a 1.816v and it seems to give out smoke most of the time. Not lots but enough to notice. It does it whether it is hot or cold.

It doesn't seem to use much water and runs fine.

 

Does anyone have any ideas what the problem could be??

 

Thanks

 

inlet valve stem seals and guides are the major oil burning culprit on the 16v, will do it on over-run, gear changes or sometimes just idling.

Of course it could be more serious engine wear such as bore damage or rings, depends on age and how well it's been serviced to a certain extent, the bottom end should do 200K easily if properly maintained.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...