matty golf 0 Posted September 15, 2007 hi there i got a set of raddo recaros and there is a plug with 7 or 9 wires in it under the seats n e ideas what this is for? if it helps there the grey with diagonal pattern ones plz help a a clueless person Quote Share this post Link to post Share on other sites
junkie 0 Posted September 15, 2007 You should have 2 plugs, 1 for the electric motors and another for the heated seats which sounds like the plug your asking about. Quote Share this post Link to post Share on other sites
matty golf 0 Posted September 15, 2007 ooh there heated didnt know that how u control them then is there a control unit and another loom i need Quote Share this post Link to post Share on other sites
junkie 0 Posted September 15, 2007 Yes there is but if you have the loom for the motors then its a lot more work than that is. You need the control switch on the dash (2 types, 1 is single dial to control both seats temp known as early type, and later type which has 2 dials to control 1 seat each) the associated wiring and 2 relays i think, possibly stats also, currently looking into it myself. Can help on the switch front see here http://www.the-corrado.net/.archive/forum/viewto ... 13&t=60186 Thats the easy bit good luck with the rest, think you will need it. Use the search for wiring diagrams etc Quote Share this post Link to post Share on other sites
matty golf 0 Posted September 16, 2007 ok cheers mate just wandering tho did passats come with heated seats cause that would be an easy way of doin it Quote Share this post Link to post Share on other sites
junkie 0 Posted September 16, 2007 They did and i have heard rumour that the switch can be taken from there so assume the loom could be as well but whether there is much difference in the length i don't know, so maybe some modification maybe needed. When you find out more share it on here please :D Quote Share this post Link to post Share on other sites
junkie 0 Posted September 16, 2007 Also before you go to the great lengths of finding the parts needed to get warm it may be worth checking the heaters will work with a multi meter for continuity, can somebody advise how this is done on which pins on the plug? matty golf edit the title so it reads correctly Quote Share this post Link to post Share on other sites