dansg60 0 Posted December 19, 2007 Hi im a newby so first of all hello to everyone! Iv just taken possesion of a 1994 vr6 auto its great but the heater blowers dont work on any of the 1-4 settings?? Does anyone have any idea where i should start trying to fix this? Cheers Dan (i need warming up!!!) Quote Share this post Link to post Share on other sites
KipVR 1 Posted December 19, 2007 Take the Stereo out, pull the ash tray out, then pull the facia off round the heater dials, then unscrew the four screws holding the heater panel in and have a look at the cable mechanism behind it to see if it's operating ok, and check the wiring too to see if it's turning the fan on..... Quote Share this post Link to post Share on other sites
dansg60 0 Posted December 19, 2007 All connections seem ok, and there is 12v coming to the switches. Quote Share this post Link to post Share on other sites
dansg60 0 Posted December 19, 2007 by blowers i mean the fan is not being activated Quote Share this post Link to post Share on other sites
MARK 16V 0 Posted December 27, 2007 by blowers i mean the fan is not being activated I had the same problem and it was the 4 speed switch itself that was faulty on mine. Quote Share this post Link to post Share on other sites
Valerian 0 Posted December 27, 2007 The fan and motor are in the passenger footwell just up behing the dash by the door side. Check that the connector hasn't come off and check that it is receiving the correct voltage. Quote Share this post Link to post Share on other sites
