Fingers 0 Posted November 20, 2003 I notice in some of the photos that people have changed the plastic sill strips for metal ones, with 16V etc etched in. Do you just peel the plastic ones off, or put the metal ones over the top? And if you have to peel it, is it easy or do you need to use a heat gun? Quote Share this post Link to post Share on other sites
vr6storm 0 Posted November 20, 2003 I notice in some of the photos that people have changed the plastic sill strips for metal ones, with 16V etc etched in. Do you just peel the plastic ones off, or put the metal ones over the top? And if you have to peel it, is it easy or do you need to use a heat gun? i just stuck mine over the plastic ones :wink: Quote Share this post Link to post Share on other sites
Leavon 0 Posted November 21, 2003 I bought some sill strips from Volksbits and was really disappointed to recieve 2 bit of flimsy metal about an inch wide. Can anyone point me in the direction of some more substantial ones? Quote Share this post Link to post Share on other sites
JT 0 Posted November 21, 2003 leavon, sorry i know this is'nt post related but really like your gear shift set-up is it a tt one and can i ask how you did it !! Quote Share this post Link to post Share on other sites
Leavon 0 Posted November 21, 2003 Heh, maybe I ought to set up a post about this, I've had quite a few enquiries about it. If you go to http://www.corrado-club.ca tech/modifications section then all will become clear. It is a TT one and there's a full guide to doing the mod there. I did mine a little differently as I wanted it to make the mod reversible. Read the guide and then PM if you're interested. Quote Share this post Link to post Share on other sites
JT 0 Posted November 21, 2003 cheers buddy i'll do that :D Quote Share this post Link to post Share on other sites
