quicky1980 0 Posted February 10, 2008 When I need to demist my boots glass all the elements besides 2 work. Ive visually inspected them and cant see any breaks and tried using a multimeter but because the elements are in paralled then I cant source the break. Any ideas on how i can track down the break, and then fix it? Or is it a case of new glass? Quote Share this post Link to post Share on other sites
davidwort 0 Posted February 10, 2008 I'd have thought there would be a break in them somewhere, have another closer look, you used to be able to get silver paint from motor factors for fixing the broken points and making a circuit again not sure they were ever a great solution though. here you go: e-bay Quote Share this post Link to post Share on other sites
coolrado 0 Posted February 10, 2008 the stuff you need is electrocure, you should be able to get it in halfords but it is about 6 quid, best way to use it is to mask either side of the break in the element with some sticky tape wait for it to fully cure and then carefully remove the tape, it does work as i repaired 4 broken elements on my last car and they worked fine for years. Quote Share this post Link to post Share on other sites
quicky1980 0 Posted February 11, 2008 will have another look, couldnt see anything but like you said there must be a break somewhere. thanks Quote Share this post Link to post Share on other sites