donnyburger 0 Posted July 15, 2008 Hi guys. I have a Corrado VR6, and have an oil leak from what looks like from the nuts under the sensors on top of the oil filter housing. I was wondering if anyone else has had this problem, if it is common, and the best way to fix it, I don't wish to top it up every morning for the drive to work, as it's only a couple of miles, and around £5! Cheers Quote Share this post Link to post Share on other sites
Supercharged 2 Posted July 15, 2008 Just change the sender - they go between the spade and the resin with age / heat - I'd do it fairly quickly as you can loose a lot of oil as they get worse, especially on the pressure side! Quote Share this post Link to post Share on other sites
donnyburger 0 Posted July 15, 2008 So it wont be the nuts eh? Which senders are they, and are they VAG only? Thanks, BTW. Quote Share this post Link to post Share on other sites
paul20v 0 Posted July 15, 2008 theres 2 oil pressure switches and the oil temp switch , you can get them elsewhere but i would get genuine , a lot of factors etc get confused with the high and low pressure oil switches . Quote Share this post Link to post Share on other sites
