mr_trumpy 0 Posted September 30, 2008 Does anyone have the pinout for the power iso plug in the Corrado wiring loom. Mines a 1992 G60 UK version if that makes any difference. Thanks in advance :D Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted September 30, 2008 Sorry are you wanting a pin that goes into the ISO block? (confused) Quote Share this post Link to post Share on other sites
mr_trumpy 0 Posted September 30, 2008 Sorry, looking for pin outs and functions for the ISO plug. e.g PIN 1 = BU/WH - ? PIN 2 = NOT CONNECTED - ? PIN 3 = NOT CONNECTED - ? PIN 4 = BN/RD - ? PIN 5 = BK - ? PIN 6 = BU/GY - ? PIN 7 = RD/WH - ? PIN 8 = RD/BN - ? Quote Share this post Link to post Share on other sites
Valerian 0 Posted September 30, 2008 PIN 1 = BU/WH - ? blue/white = Speed sensor feed PIN 2 = NOT CONNECTED - ? PIN 3 = NOT CONNECTED - ? PIN 4 = BN/RD - ? brown/red = Ignition switch live PIN 5 = BK - ? black = +12v to aerial amplifier (switched feed from head unit) PIN 6 = BU/GY - ? grey/blue = illumination feed (to turn on head unit illumination when the lights are switched on) PIN 7 = RD/WH - ? red/white = permanent battery live PIN 8 = RD/BN - ? brown = earth Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted September 30, 2008 http://www.the12volt.com/installbay/ste ... /2167.html - Late corrado http://www.the12volt.com/installbay/ste ... /2166.html - early corrado Quote Share this post Link to post Share on other sites
mr_trumpy 0 Posted October 1, 2008 Cheers lads, all sorted now :-) Quote Share this post Link to post Share on other sites
