flyte 0 Posted January 19, 2009 I know this has been discussed and I have read a warning on this, but I thought it best to post this again jsut incase anyone is new to Corrados or had forgotten like me! Whilst taking the dash out to change my heater matrix, I was shocked to see that the heater speed control (mounted on top of the blower unit) at some time had caught fire! I have attached the pic and believe this was pre me owning the car, but I would say its worth popping the glove box out and giving it a check over, which could be done in 10 mins. Sorry if u know about it, but if you dont I hope it helps! S Quote Share this post Link to post Share on other sites
krnau 0 Posted January 19, 2009 :shock: :shock: :shock: :shock: :shock: :shock: so what do you say I should revise??????? o_O o_O o_O Quote Share this post Link to post Share on other sites
flyte 0 Posted January 19, 2009 I am sure their are docs on this in the archive, but behind the glove box is the blower motor, and on top of that the speed control unit, i found mine had melted and burnt the insulation, if you pop out the glove box ( 4 screws) you should be able to inspect it with a torch :) hope this helps! S Quote Share this post Link to post Share on other sites
krnau 0 Posted January 19, 2009 thank you mate. I remember when I replaced the heater matrix (what a lovely job :pukeright: ) I didn't see anything burnt in there. thanks :) Quote Share this post Link to post Share on other sites
mort1414 0 Posted January 19, 2009 this is now added to my corrado list for this weekend thnx for the thread would not have checked otherwise Quote Share this post Link to post Share on other sites
