Jump to content
Sign in to follow this  
Stryker

'Shaky' and 'lumpy' when pulling away

Recommended Posts

As above really, when pulling away from traffic lights and such, the car dosnt move smoothly, its almost as if the front calipers are seizing but i know it cant be this cos just recently i had one of them replaced,

 

any ideas? someone suggested that the clutch is not releasing properly

 

any help appreciated

Share this post


Link to post
Share on other sites

need to check all the basics first, ignition weaknesses show up worst under load, are the plugs, leads, rotor arm etc all in good nick?

If a clutch is slipping it's usually worst in high gears, could be engine mounting, the front is the one that usually goes, put it in gear with the bonnet up and take the weight of the car on the clutch with the brakes on, does the engine rock/lift loads?

Share this post


Link to post
Share on other sites

will try that cheers mate,

 

it idles just fine, spark plugs and leads have all been changed recently, its just almost like something is stopping the car from moving forward and the front of the car kinda bounces up and down slightly,

 

confusin i know lol

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...