__Andy__ 0 Posted February 25, 2009 can i get a new bolster and where from, tryed ebay and german ebay and not found a thing. going to try vw tomorrow but i hasten to think how much its gona cost... second question is: is there a guide on the wiki on how to change 'recaro' bolster's, ive changed the bolsters in a set of standard corrado seats before using the guide from the wiki but wanted to know if there is a guide on the wiki specific to the recaro's? if there isnt then geuss what ill be documenting and putting up on the wiki?!! any help as always is greatly appreciated.. Regards, Andy Quote Share this post Link to post Share on other sites
Supercharged 2 Posted February 25, 2009 http://www.capitalseating.co.uk/product ... d=61&mid=2 Quote Share this post Link to post Share on other sites
__Andy__ 0 Posted February 25, 2009 http://www.capitalseating.co.uk/productlist.asp?type=s&view=range&rid=61&mid=2 thankyou so much, picked the seats up earlier tonight and they arent anywhere near as good as described. managed to knock the guy down a bit but nowhere near as much as id of liked. seeing that website has cheered me up though.. Quote Share this post Link to post Share on other sites
vwdeviant 0 Posted February 26, 2009 Bugger... :( How bad? Quote Share this post Link to post Share on other sites
A1 VR6 0 Posted February 26, 2009 second question is: is there a guide on the wiki on how to change 'recaro' bolster's, ive changed the bolsters in a set of standard corrado seats before using the guide from the wiki but wanted to know if there is a guide on the wiki specific to the recaro's? if there isnt then geuss what ill be documenting and putting up on the wiki?!! any help as always is greatly appreciated.. Regards, Andy Have done this but probably about 10 years agoin pre-wiki times. IIRC the bolster covers are separate to the base cover and the base cover is secured at the rear with a plastic trip. the bolster covers have a wire runnning through loops in them them which I think is secured by metal rings. It is pretty straightforward and no more difficult than removing a standard seat base cover. HTH :) Quote Share this post Link to post Share on other sites