choumbie 0 Posted December 24, 2003 I just purchased an Autometer Phantom Boostgauge and Air/fuel gauge....the people i bought them from told me that i needed some kit to hook the air/fuel gauge up to my car....so i said fine, add that in too. It ended up being about 100 bucks extra...So i was wondering...Is this kit needed? Is there any way i can do without this? I heard it could be done without. If anyone has an air/fuel gauge, or any info on installing this, ide appreciate it, thanks. Quote Share this post Link to post Share on other sites
W3RKD 0 Posted December 24, 2003 hello there , tofit your air fuel gauge all you need do is take the live and nuetrual wires to the relavent places behindthe dash / battery and then the signal wire connects to the signal "violet" wire from the lambda.(this is the wire on its own on the plug of 4 wires connectind on the clip attached to the rear engine mount..) what i think you may have beed sold is a kit for fitting a wideband(ie extra lambda etc) which im sure your gauge is not.. then again surly the store would of known this... hth Quote Share this post Link to post Share on other sites
choumbie 0 Posted December 26, 2003 The people I bought it from said that ide need to cut a hole in my exhaust pipe, and weld this piece that i bought into it or something like that....Completely unneeded? Quote Share this post Link to post Share on other sites
Supercharged 2 Posted December 26, 2003 Only if you don't have a Lamda Probe fitted already, unless your gauge requires a completly seperate probe maybe because of current draw? Quote Share this post Link to post Share on other sites
