g60_jimbob 0 Posted April 16, 2009 hi everyone,i am new to all this! had my g60 4 a month now,and my first job is to do my brakes all round because they have had it!!. Wheather permited i am going to do them this weekend.I was talking to one of my mates last night and he said are they winding calipers?, if they are he has the tool to lend me!! So could anyone tell me the correct answer for this question as i do not know!! I would be most gratefull for anyhelp on this! thanks .. james. Quote Share this post Link to post Share on other sites
davidwort 0 Posted April 16, 2009 rears need a caliper piston wind back tool, fronts just push back. Quote Share this post Link to post Share on other sites
sean1380 0 Posted April 16, 2009 needed one on the front of mine as one of the pistons had abit of rust on under the rubber dust seal so had to get emery cloth out n make her all smooth n shiney agin n then wound her back with som wd40,works ok now Quote Share this post Link to post Share on other sites
g60_jimbob 0 Posted April 17, 2009 Thanks alot lads for your advice :grin: i will have ago at them this weekend!! cheers.. Quote Share this post Link to post Share on other sites
boost monkey 0 Posted April 17, 2009 needed one on the front of mine as one of the pistons had abit of rust on under the rubber dust seal so had to get emery cloth out n make her all smooth n shiney agin n then wound her back with som wd40,works ok now be careful with WD40, it may contaminate your brake fluid. Quote Share this post Link to post Share on other sites
sean1380 0 Posted April 17, 2009 ah right my mate necer told me that,it was only a little bit to lube the emery cloth to get rid of the rust on the caliper piston cheers for the tip tho ill be carefull in future Quote Share this post Link to post Share on other sites
