C.P 0 Posted May 5, 2009 what is it that stops the sunroof from sliding? had a wee look while i had the roof lining off a while ago but didn't really get anywhere with it at the time but now i quite fancy having my sunroof for the summer months. any info about fixing it would be much appreciated :wink: Quote Share this post Link to post Share on other sites
Jim 2 Posted May 5, 2009 It's the common fault where one side of the mechanism will snap which results in the mechanism failing to work. There is no easy way round it - you need to source the sunroof repair kit from your VW dealer (approx £60 I think) and set aside a day or two to work on it. There was a sunroof repair guide which you should be able to find if you hit up the search :) Quote Share this post Link to post Share on other sites
waggy2114 0 Posted May 17, 2009 Yeah the passenger side mech is common to failing but you can NO longer get the parts from vw as they have dropped them as i recently found out so its a matter of finding used frames with the mechanisms intact and working then just transplanting the other parts off the old one. Hope this is some use to you. Quote Share this post Link to post Share on other sites
C.P 0 Posted May 17, 2009 thanks! i can definitely see one broken bit on the passenger side, and i suspect the cable is broken too. Are there any other VAG's that have the same sunroof mech's that i could steal? Quote Share this post Link to post Share on other sites
awright182 0 Posted May 17, 2009 I'm suprised they are discontinued. I got the parts from VW last Autumn. There was a huge mark up. Mk III Golf parts are identical in shape but seem to be finished in black rather than chrome You'll have to take your roof lining down again Andy Quote Share this post Link to post Share on other sites
C.P 0 Posted May 17, 2009 that's alright, i don't mind about the colour. i'll take a trip down to the scrappies soon! Quote Share this post Link to post Share on other sites
waggy2114 0 Posted May 18, 2009 I have just transplanted a MK3 golf one in the motors are different but the mechanisms and mounts are spot on and just fit straight on no messing. I just re-greased it all up before fitting and have had no probs as of yet. Quote Share this post Link to post Share on other sites