Phil_J 0 Posted August 4, 2009 I was hoping that one of the members oh here could possibly tell me how to disable the imobiliser part of the factory fitted logic 600 alarm system or where I can download a wiring diagram for this unit. I have a problem with my car sometimes not starting. (it will turn over but there is no spark) this can happen at any time and once or twice the car has cut out when driving along. usualy the car will start after 5 or 10 minuets. My garage say it is the imobiliser so I need to take this out the picture to prove them right or wrong. Thanks for your help. Quote Share this post Link to post Share on other sites
yalan 0 Posted August 5, 2009 Mine had a comlog fitted when I bought it. Swapped it out for a Toad ai606 instead which has been faultless. The conlog was a dealer fit option and not factory fitted - hence it will have been fairly crudely fitted under the dash and spliced into the loom in a haphazard way. Just take the lowed dash off, find the unit and trace all the wires. Not too bad a job if you've got a basic understanding of auto electrics / alarms. Quote Share this post Link to post Share on other sites
