G60Dan 0 Posted January 14, 2004 I'm going to get a boost gauge in the G60 soon. I only want to go for the single gauge so I'll have a pillar pod. I've found this one on http://www.needforspeed.co.uk/rgmstylin ... Type=PMS01 as in the pic: Those with pillar pods, can you post pic's of yours & where you got it - & the URL if it's from a site :thumb right: Also same for the boost gauge. One last thing - how are these plumbed in on the G60?? Thanks for all the help Dan 8) Quote Share this post Link to post Share on other sites
Guest Posted January 14, 2004 theirs a vid that andi is hosting that explains how to 'plumb' them into the G60. goto http://fastpurple.co.uk/corrado/vids/ and you want the tech talk G-lader vid :D Thera Quote Share this post Link to post Share on other sites
Henny 0 Posted January 14, 2004 I got my Autometer Prolite gauges from HERE. The guy is really good with his prices and seems pretty genuine. It's the shop the Autometer group buy was going to be using before the group buy fell apart... Quote Share this post Link to post Share on other sites
LowG 0 Posted January 14, 2004 I bought the same pod with 2 holes,i have a air/fuel and boost gauge. To put it in that location as the pic you put the vacume cable through your dash speaker and hten out of your firewall through one of the holes. Personally i have conected hte boost tube where the co pot was previously conected to boost,would make it easier if my cam worked i could have taken a pic of my set up. i suggest that you buy a air fuel gauge aswell,will save you any major engine damage if youplan to play with timing and fueling. just my 2p migs Quote Share this post Link to post Share on other sites
G60Dan 0 Posted January 15, 2004 ['H3R4POR]theirs a vid that andi is hosting that explains how to 'plumb' them into the G60. goto http://fastpurple.co.uk/corrado/vids/ and you want the tech talk G-lader vid :D Thera Spot on mate. Nice & easy! Quote Share this post Link to post Share on other sites
GazzaG60 0 Posted January 15, 2004 no need to go through the bulkhead for boost gauge. t-piece into the hose on the back of the clocks. you need to rremove the covers from under the steering wheel its a blackor white solid plastic hose with a rubber attachment on it. cut the rubber and t-piece in. get a v good seal on it and away you go. Quote Share this post Link to post Share on other sites
G60Jet 1 Posted January 15, 2004 try http://www.rgmstyling.com gauge pods EDITED URL TO .com INSTEAD OF .co.uk it link to needforspeed as stated below Quote Share this post Link to post Share on other sites
G60Dan 0 Posted January 16, 2004 try http://www.rgmstyling.co.uk for gauge pods link doesn't work mate, but RGM's site is part of on http://www.needforspeed.co.uk/rgmstylin ... Type=PMS01 Quote Share this post Link to post Share on other sites
G60Dan 0 Posted January 19, 2004 Right peeps, I have my boost gauge now, I need an "A" Pillar Pod now - prefer in matt black. I did put an order in for the one on the top post but they are out of stock & don't know when they are getting any more. So if anyone could point me in the right direction of a nice a pillar pod, that would me my appreciated Cheers Dan Quote Share this post Link to post Share on other sites
G60Jet 1 Posted January 19, 2004 the ones from RGM are Carbon effect, you could try Venom motorsport as they do list them, but thats where i ordered mine from and it came direct from RGM. I sanded mine down and sprayed it with a satin finish paint and it matches the piler pod now. Quote Share this post Link to post Share on other sites
g60pm 0 Posted January 19, 2004 Got my boost gauge and a post pod from Revotec..Search Internet. There boost gauge has Suercharger written in blue on a white face, i think they are the only company that does this... Good gear... Quote Share this post Link to post Share on other sites
C. Will Corrado G60 2 0 Posted January 20, 2004 Guys, I've been thinking about getting an A-pillar gauge pod for a while, could someone tell me what kind of boost gauge (psi) reading level I should go for? looking at revotec ones they do: Boost Gauge -1 to 2 bar Boost Gauge 30HG to 30psi Quote Share this post Link to post Share on other sites
G60Dan 0 Posted January 21, 2004 Guys, I've been thinking about getting an A-pillar gauge pod for a while, could someone tell me what kind of boost gauge (psi) reading level I should go for? looking at revotec ones they do: Boost Gauge -1 to 2 bar Boost Gauge 30HG to 30psi Horse's for courses there mate, some suit others better. Personally I have gone for the PSI Boost gauge. I think it's easier to get an actuate reading from - Especially at a glance while driving! IMO anyway :wink: Sill having trouble getting an a pillar pod!!! If anyone know where there I can get one (for the corrado - now some universal jobbie!) let me know. Links would be very handy! Cheers Dan Quote Share this post Link to post Share on other sites
Fat Tony 0 Posted January 21, 2004 I got up to 15 psi do a search on boost guage and you'll find a ton of stuff on here Quote Share this post Link to post Share on other sites
C. Will Corrado G60 2 0 Posted January 22, 2004 Ok, I've now been looking for RHD custom fit twin A-pillar pod and so far they are all universal. Can anyone help, please? Quote Share this post Link to post Share on other sites
Fat Tony 0 Posted January 22, 2004 mailto:[email protected] http://www.gaugeman.com/mounting_equipment.htm There's a guy in Nottingham that will do it but you need to give him your current pillar cover so as he can make a mould. But as the C's is so long it would be expensive. We tried a group buy the last time but we couldnt get enough people for them. Quote Share this post Link to post Share on other sites
Fat Tony 0 Posted January 22, 2004 http://the-corrado.net/.archive/forum/viewtopic. ... ght=pillar The below is a quote from the above. They also mention Nomad (who are the Notts based firm) At last i found pods for the LHD!! Placed the order but havent recieved it yet so i dont know if its a perfect fit or if they look any good. It can be found on http://www.realcar.se on the bottom of the screen its a link for english translation. They have dual and single pods, they cost abit tho around 50-60£ If you cant find your way around the site this is the the article code for PILLAR MOUNTS LEFT VW CORRADO DOUBLE L/HAND VWCOR100852 And PILLAR MOUNTS LEFT VW CORRADO SINGLE L/HAND VWCOR100851 then you can mail them for info at mailto:[email protected] Quote Share this post Link to post Share on other sites
CC WillG60 0 Posted January 28, 2004 Hi, Sorry to confuse people but I've logged in at home now & had to set up a new account as I couldn't remember my details. Am I right in saying there are NO custom fit A-pillar pods available for the Corrado? Cheers Quote Share this post Link to post Share on other sites
G60Dan 0 Posted February 2, 2004 Where can the centre gauge pod be bought? Quote Share this post Link to post Share on other sites
RACK 0 Posted February 4, 2004 Just looked at that RGM website and they do a double pod. I was thinking about getting an Air/Fuel gauge to go in the other pod. Has anyone seen the one Pitstop developments do. I saw a pic the other day and it looks well smart. Has anyone got anymore info. P.S. Sorry if this goes off the thread a little. RACK Quote Share this post Link to post Share on other sites
G60Dan 0 Posted February 20, 2004 Problem solved! https://www.needforspeed.co.uk/ Black (non carbon look) A pillar pod on it's way :D Quote Share this post Link to post Share on other sites
C. Will Corrado G60 2 0 Posted March 1, 2004 Hi, Just received my right-hand double a-pillar mount and it fits perfectly!!!!!!! Well happy!!!! :lol: Quote Share this post Link to post Share on other sites
G60Dan 0 Posted March 3, 2004 I've got mine in, just what I was after. Will post pic's soon Quote Share this post Link to post Share on other sites
G60Dan 0 Posted March 8, 2004 I just need to wire up the light in it now. Question, where is the best place to wire it up to? I have had the head light switch out thinking it would seem quite obvious where the + & - would have to come in, but there were about 10 different wires back there??? Anyone help here? Thanks Dan Quote Share this post Link to post Share on other sites
