raddo_tom 0 Posted January 20, 2010 Any tips on tightening my cables? Too many clicks to pass a mot. :( Quote Share this post Link to post Share on other sites
Guest Posted January 20, 2010 if you take your cover of your hand brake you will see two cables running into the bottom mech and a 2 pairs of nuts on the other side unlock tighten up and renip togeather shound be job done dont over tighten as your brakes will bind while your driven hope this helps Quote Share this post Link to post Share on other sites
raddo_tom 0 Posted January 20, 2010 Your a star thanks! Quote Share this post Link to post Share on other sites
colinstubbs 0 Posted January 20, 2010 Don't forget there's a screw accessed from the rear ash tray 'hole', you break it if it hasn't been done before!! Quote Share this post Link to post Share on other sites
Guest Posted January 21, 2010 Your a star thanks! haha :grin: nar worries, how did you get on? Quote Share this post Link to post Share on other sites
raddo_tom 0 Posted January 21, 2010 two 10mm spanners one set of mole grips..... And..... I HAVE AN MOT! Quote Share this post Link to post Share on other sites
Guest Posted January 21, 2010 :clap: top work another year down Quote Share this post Link to post Share on other sites
colinstubbs 0 Posted January 21, 2010 Hurrah!! Quote Share this post Link to post Share on other sites
