dene4638 0 Posted February 13, 2010 hi there guys was just wondering if any of you could help, i have bought VR clocks to go in my 16v that has a vr6 engine and have the loom as im told i need these to get it all running right.. they 16v clocks only had 2 blue plugs the VR have four extra single plugs, now this is where my problem lies.. can you help?? where do they go? or does it matter if they are left out? cheers Dene Quote Share this post Link to post Share on other sites
dene4638 0 Posted February 15, 2010 anyone? not even a picture? :/ Quote Share this post Link to post Share on other sites
shaung60 0 Posted February 15, 2010 Leave them out and see if the clocks work as they should. If the clocks don't work then get down to the fusebox and look for the other ends of these plugs. I'm sure they must be colour coded. Quote Share this post Link to post Share on other sites
dene4638 0 Posted February 15, 2010 that was my last resort, but while taking engine loom out i did notice some single plugs were plugged into other colour wired plugs, yet the car all worked fine.. :/ tad confuzzled.. Quote Share this post Link to post Share on other sites
