laminex sizes wanted....

[lion 0]

ive tried the search but no joy..

i need to know the size needed to tint the rears(or just the top) an size to tint inproheadlights?

 

sizes and prices if anyone is in the know

THANKS

[dan 0]

You're best to get it oversized because you'll need to wrap it over the edges of the lights (the back ones anyway) and then trim it up using a sharp knife. So you'll need approx 150 x 300mm to cover each top half section of the back lights. It all depends on what size the Laminex comes in, you know you'll need approx 150 x 300mm (x4) but you should look for something like 300 x 600mm & that would be enough to cover all the top halves on the rears (not allowing for mistakes of course).

 

I don't know about the fronts, haven't done any before. I assume their not specific to each car lights so just measure where you want to cover & add maybe 20mm all round just to be on the safe side.

[The_Dude 0]

Riley is the dude who sells it.