harin 0 Posted July 22, 2010 hi, So making good use of my time between jobs and fitting a nice pioneer head unit to the c. The stereo doesn't want to work when the car is switched off and ignition on. Checked power with voltmeter and i get the following: Positive : Constant 12ish volts Ground: Fine Ignition: I see 12 volts when turning the key but no 12 volt when its in ACC. Is this correct behavior or should it be a constant 12v when on ACC? Haven't seen that exact problem as a symptom of dodgy ignition switch so thought it would be worth checking with you lot! Quote Share this post Link to post Share on other sites
harin 0 Posted July 22, 2010 Ok so it starts working sometimes when I wiggle the key so I guess it is the ignition switch. On my way to the stealers now to get one :( Quote Share this post Link to post Share on other sites
harin 0 Posted July 24, 2010 Taken out the bottom steering column cover and still can't see the damn screw! Its going to be a long day! Quote Share this post Link to post Share on other sites
colinstubbs 0 Posted July 24, 2010 http://wiki.the-corrado.net/ignition_sw ... ement.html 8) Quote Share this post Link to post Share on other sites
harin 0 Posted July 24, 2010 http://wiki.the-corrado.net/ignition_switch_replacement.html 8) Thanks, found it in the end. Didn't do my back any good though! Quote Share this post Link to post Share on other sites
