lupo wiper conversion

[simo79 0]

hi guys

 

done the lupo wiper conversion ( aberdeen vw fleeced me the arse of £90 for the arms and blades) and the drivers wiper works fine, but on the passenger the wiper doesnt run clean over the wipe area.

 

It leaves a section on the middle un wiped at the middle section of the balde.

 

Was wondering if anyone else experience this and if its easy enough to cure.

 

Once again i bow to your wisdom :notworthy:

 

 

si

[g60jaime 10]

I had this when I did mine. The middle of the blade had no contact with the screen mid-screen/wipe.

 

I simply swapped the arms over to check consistency between their sweeps and it cured it. (Drivers to passenger side and vice-versa).

 

P.S. did you buy two drivers side arms, otherwise passenger side Lupo arm will foul your bonnet when you lift it to wash the car etc...?

[G60BUNGLE 0]

I had this problem i just "adjusted" the passenger one by bending it a touch sorted it straight away

[krnau 0]

I had the same too, so I bended both arms a little as well as blades. not that great mod as I thought it would be though..

[simo79 0]

I had this when I did mine. The middle of the blade had no contact with the screen mid-screen/wipe.

 

I simply swapped the arms over to check consistency between their sweeps and it cured it. (Drivers to passenger side and vice-versa).

 

P.S. did you buy two drivers side arms, otherwise passenger side Lupo arm will foul your bonnet when you lift it to wash the car etc...?

 

 

yeah got both driver side, never thought of swapping them though. tried bending them but didnt make much difference.

 

 

cheers peeps