VR6 Gar 10 Posted March 5, 2011 Got another set of clocks and need to remove the water temp/fuel section to put in my other set. Cant see how I remove it though. Got the plastic face off fine, and removed the 2 securing screws on the dial, but the needles seem to be stopping me from taking it out, and they dont seem to want to pull off. How is it removed? Quote Share this post Link to post Share on other sites
beastie4126 0 Posted March 5, 2011 You will need to lever the needles very gently with a two pronged implement, I used a dining fork last time I did it as the prong's are quite close togther. Have a look at http://www.dubdesignindustries.com/installation/gaugeinstall.pdf for pics and stuff Quote Share this post Link to post Share on other sites
VR6 Gar 10 Posted March 6, 2011 Cheers, although it turns out the 3 dials just pull straight out. Quote Share this post Link to post Share on other sites
