GazzaG60 0 Posted March 24, 2003 here we are again... anyone done a clutch master cylinder on a G60 before? was wondering how difficult it is as far as inlet goes. its pretty tight down there and am hoping it can be removed without taking it off. obviously the bently is for a left hooker n the vortex is of the opinion that it aint the nicest job in the world. gotta do it soon. been puttin it off for a while but clutch is now only 50% so... anyone done it before cheers Quote Share this post Link to post Share on other sites
G60ING 0 Posted March 24, 2003 I've only done a master cylinder on the transmission side of the car and I only had to remove the reservoir bottle and I had all the room nessecary. If you could please take some pics of it if its on the Driverside as I'd love to see the setup. I love tech photos :shock: Quote Share this post Link to post Share on other sites
GazzaG60 0 Posted March 24, 2003 will do. fixing or trying on the sunroof too. will get some photos of that..n the frontmount IC. sure there must be a hole for it on your bulkhead. its behind the inlet runner 3rd from throttle body Quote Share this post Link to post Share on other sites
G60ING 0 Posted March 24, 2003 The hole is not punched out but the impression is there Quote Share this post Link to post Share on other sites
