ktvan018 0 Posted March 4, 2004 I was recently installing an Oil Cooler Kit for my VR and ran into a nice problem just as i was finishing up. The little nipple thing on the H2O Distribution Tube, where the stock oil cooler hose plugs into the coolant system, broke and I now have to replace the tube. I have the part and am ready to dive into this, but I am not quite sure if I want to dive into it or if I should just take it and have it done at the shop. As all who have worked on these engines know, there is not a lot of space in there and maneuvering around is not the easiest. If any one has replaced this before or knows any helpful hints on this please let me know. I appreciate any help any one can give!! Thanks Quote Share this post Link to post Share on other sites
