hawwy 10 Posted June 19, 2011 VCDS-Lite Version: Release 1.1 Saturday, 18 June 2011, 22:22:24. Chassis Type: 50 - VW Corrado Scan: 01,02,03,15,25 ------------------------------------------------------------------------------- Address 01: Engine Labels: 021-906-258.LBL Controller: 021 906 258 AG Component: MOTOR PMC 1 Coding: 0261203109 Shop #: 1267357531 VCID: 59C50E67D017 6 Faults Found: 00527 - Intake Manifold Temperature Sensor (G72) 30-00 - Open or Short to Plus 00537 - Shareware Version. To Decode all DTCs 08-10 - Please Register/Activate - Intermittent 00553 - Shareware Version. To Decode all DTCs 29-10 - Please Register/Activate - Intermittent 00533 - Idle Speed Regulation 10-10 - Adaptation Limit Not Reached - Intermittent 00525 - Shareware Version. To Decode all DTCs 29-00 - Please Register/Activate 00513 - Shareware Version. To Decode all DTCs 03-00 - Please Register/Activate Readiness: N/A i have just put a new lambda sensor in yesterday i have got the codes check they are: oxygen sensor control idle air contol regulation mass air flow sensor o2 sensor voltage low what do the above mean , i dont know why o2 sensors coming up as i just changed lambda anybody help me, as cars giving lots of trouble Quote Share this post Link to post Share on other sites
joby 0 Posted June 19, 2011 Can you not clear the codes then run vagcom again, they generaly don`t clear themselv`es clear them then run it again thats what i do with my audi Quote Share this post Link to post Share on other sites
