Jim Bowen 1 Posted December 7, 2011 Am guessing its glued on? All the top and middle of mine is loose and flapping about, had to take some plastic nuts off from inside. But the bottom edge is stuck on solid, is there a special way to remove it? Already cracked it a little :( Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted December 7, 2011 heat gun or hairdryer to the bottom of it mate........ this will help to melt the glue & also make the plastic less brittle. Quote Share this post Link to post Share on other sites
VR6 0 Posted December 7, 2011 Bottom edge is taped/glued. Good luck! You probably won't get it off in one piece but use a lot of heat and gentle pressure. Quote Share this post Link to post Share on other sites
sexybourbon 0 Posted December 7, 2011 Use some fishing line to cut through the double sided just wrap some between both hands and work your way through then just clean the glue off ! Youll get it off without even touching the number plate plinth Quote Share this post Link to post Share on other sites
