welshlad73 10 Posted December 29, 2011 (edited) Hi guys, just thought i'd post something a bit odd with my G60. I'm in the process of getting my car back on the, purchased a 68mm pulley and chip a few years back.Both installed and runs fines for a while, then it over fuels on cylinders 3 + 4. Causing the car to misfire and poor starting. I removed the tuned chip and installed the original, now the car wont start. No spark, i've checked the files on the chips and there seems to a section of the memory missing. Bare in mind these chips are uv erasable only. Very strange, i wonder if anyone has come across this before???? Edited December 31, 2011 by welshlad73 Quote Share this post Link to post Share on other sites
welshlad73 10 Posted December 30, 2011 (edited) Problem solved, my Co was reading 12% on idle, gas tester and a few adjustments makes her run pretty good. Using the tuned chip, still no success with original. Edited December 31, 2011 by welshlad73 Quote Share this post Link to post Share on other sites