hustler 0 Posted March 22, 2004 anyone know what a good price on 2.0l je pistons are for a g60 engine? there compression ratio of 9:1. The bore is 3.268 and the dish is -.240. The pistons come with JE rings and pins. are they any good and would they suit a 2.0l 16v g60 once bored for the extra valve? on a regular 1.8 g60 would i need to upgrade anything else? ive a stage 4 charger chip and 68mm pulley cheers for the info Quote Share this post Link to post Share on other sites
beavis 0 Posted March 22, 2004 The figures you have are a bit arbitory. Works out to a 83mm bore which is not going to give you 2.0l on the stock PG crank. What units are the dish measurements you have given in ? Is the compression ratio a quoted one or the compression you are looking to achive? What you need to know is the stroke of the crank you are using, the bore diameter you are stepping up to, the volume of the combustion chamber in the head you plan to use, the thickness of the headgasket you ar going to use, from this the volume of the dish of the bowl can be calculated to achive the compression rtio you are desiring. Quote Share this post Link to post Share on other sites
