V33DUB 0 Posted June 12, 2012 Any old standard one will do... need it to connect to the calipers to get the piston out with a grease gun. Cheers Quote Share this post Link to post Share on other sites
swampy 0 Posted June 12, 2012 Can do you a shiny new braided pair for when you refit them!!! If you have a trigger gun with a nozzle on you can put that in to the caliper and blow the piston out Quote Share this post Link to post Share on other sites
V33DUB 0 Posted June 12, 2012 Yeah got the gun... pressed the grease down the hose before... wasn't sure if it would work direct into the hole (for want of a better word!) Quote Share this post Link to post Share on other sites
swampy 0 Posted June 12, 2012 Normaly just pump air in to it don't use grease Quote Share this post Link to post Share on other sites
V33DUB 0 Posted June 12, 2012 No air gun, not foot pump, no air! Used grease before as read on the internet people had used it before and I have grease and a gun already. Quote Share this post Link to post Share on other sites
swampy 0 Posted June 12, 2012 Oh I see Can't help them I'm afraid just make sure you get all the grease out before you refit it Certain types of grease will mess the rubber seals up in no time Quote Share this post Link to post Share on other sites
V33DUB 0 Posted June 12, 2012 Yeah they'll be dipped before painting and fitting all back together etc ---------- Post added at 4:22 PM ---------- Previous post was at 3:53 PM ---------- Just read that the rears wind in... gonna get the tool to do it so please ignore this request. Quote Share this post Link to post Share on other sites
