Jump to content
Sign in to follow this  
bankyg60

help!!!!!!!!!

Recommended Posts

i have changed all my oil switches .

and the oil plus the oil pump but the d.m thing keeps flashing and beeping at me .

i have had a stage 4 charger done by jabba,and chip and pully,

and my oil temp is 105digrees goes up two 115 on the motorway at 80mph.

but when i come of the motorway the light comes on

can any one give me a clue whats going on ....

ive also flushed the engine out incase any oilways were blockrd.

could it be a electrical falt .......?????????/ :( :(

Share this post


Link to post
Share on other sites

You may well have a blockage in one of the oilways which can be overcome when the pump is pumping harder at higher rpm. Why not hook up a pressure guage to see what the oil pressure actualy is?

 

Have you tried running some engine flush through the engine and then replacing the oil as that might clear any blockage?

 

One other thing to check is the condition of the dipstick. It sounds silly but my house mate had a Mk1 GTi which lost oil pressure when cornering and we were sure that the thing was full of oil until we realised that the dipstick was bust and had slid down the the plastic stop thus giving a false reading and the engine was actualy about 2 litres short on oil.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...