LeonL 0 Posted October 2, 2012 Been told I can purchase the elbow from Vw heritage but entering the part number everyone lists doesn't give any results? Any ideas on if there is another p/n I need to use? Cheers Quote Share this post Link to post Share on other sites
Storm Guy 0 Posted October 2, 2012 535 121 647 elbow, 535 121 687 seal HTH - if its the part youre looking for Comes straight up at vwheritage Quote Share this post Link to post Share on other sites
OllieVR6 0 Posted October 2, 2012 Seal is out of stock though :( Sent from my HTC One X Quote Share this post Link to post Share on other sites
bristolbaron 10 Posted October 2, 2012 seal is available from vw. Quote Share this post Link to post Share on other sites
Stonejag 10 Posted October 2, 2012 I was also told it was obsolete, so I got a bag of seals online. If anyone wants a free one let me know, I had to buy ten of them and I only have one Corrado! Stone Quote Share this post Link to post Share on other sites
LeonL 0 Posted October 2, 2012 Elbow ordered (Problem was i was entering part number into the actual vw classic search bar, ended up working in the normal search bar), as mentioned above seal is out of stock it seems :( Quote Share this post Link to post Share on other sites
OllieVR6 0 Posted October 2, 2012 I was also told it was obsolete, so I got a bag of seals online. If anyone wants a free one let me know, I had to buy ten of them and I only have one Corrado! Stone I take it you've used one and it's ok? If so I'll happily take one off your hands. Happy to pay for it! Quote Share this post Link to post Share on other sites
Fine wine, Belgian chocs. 1 Posted October 3, 2012 I had to buy ten of them and I only have one Corrado! You got off lightly. I wanted one urgently so I bought this: http://www.screwfix.com/p/metric-o-ring-set-419-pc/27385 So that was four hundred and fecking eighteen more o-rings than I actually needed. :) Quote Share this post Link to post Share on other sites
Supercharged 2 Posted October 3, 2012 You got off lightly. I wanted one urgently so I bought this: http://www.screwfix.com/p/metric-o-ring-set-419-pc/27385 So that was four hundred and fecking eighteen more o-rings than I actually needed. :) I have that set but they are all too thin compared with the seals used on the Corrado... Quote Share this post Link to post Share on other sites
Fine wine, Belgian chocs. 1 Posted October 3, 2012 (edited) I have that set but they are all too thin compared with the seals used on the Corrado... Etka says the seal on the elbow is 31x3.2mm. The one I used from this set was 31x3.5mm so it's actually fractionally thicker in theory. Fitted a treat for me and sealed 100% (even when I pressure tested the system at 30psi by mistake). Edited October 3, 2012 by Fine wine, Belgian chocs. Quote Share this post Link to post Share on other sites
